Previous Page. Next Page. Paintball equipment dye NT11 Owner's Manual 22 pages. Page 3: Quick Reference Turning the adjustment screw counterclockwise, or out, will raise the output pressure, increasing the velocity. NOTE: If the battery is too low, it may not be able to power the solenoid correctly.
Page 4 When ABS is activated, the dwell is increased after 15 seconds of non-use for the next shot fired. As soon as the marker is turned on and the LED turns from blue to either red or green, the DM4 is ready to fire. If there is no This helps to prevent bolt-stick, but may result in higher velocity for the first shot.
Page 5 Trigger sensitivity is the amount of time that the trigger has to be released before next trigger pull is allowed. There is no low battery warning on the DM4. The 9V battery will last for about 40, shots, but there are big In some situations with too low of a value, the marker may begin to shoot full-auto.
This will create excessive friction and drag on the bolt, ultimately resulting in breaking the bolt. When greasing the DM4 bolt Cylinder kit, pay special attention to all o-rings that are on the bolt and that ride on a surface of the bolt.
The factory setting is 75 PSI. You can fine tune your DM4 to its minimum cycle pressure. This will reduce the amount of force of the bolt hitting the ball reducing ball breaks and help with efficiency. If that does not help, change the seal retainer inside the LPR body. Print page 1 Print document 10 pages.
Rename the bookmark. Looking for marker software updates? Click Here. Looking for replacement parts? Close menu. Close cart. Click any manual below to download If you have any tech questions, don't hesitate to call and our staff will be happy to assist you: Click Here Looking for replacement parts? DYE Paintball markers are not a toy. Misuse may cause serious injury or death.
Recommend 18 years or older to purchase. Persons under 18 must have adult s upervision.
0コメント